Single or Multi-Leg Push-Fit Tank Systems
Our unique range of large diameter fittings enables engineers and contractors to design and build complete tanks systems for stormwater and foul water attenuation or storage.
Fully integrated push-fit, sealed joint system on all pipes and components.
Robust Components manufactured from a range of steel and composite materials.
Any configuration can be designed to suit project requirements.
Fully Accessible as required by BS EN 752 via Man-Entry and Non-Man-Entry Access Turrets.
Pipes and components have a smooth internal surface, maximising flow performance, and minimising siltation.
Sealed, Push-Fit tanks, installed in any weather, with no requirement for welding on site.
Manifolds are quickly set in position and pipes are placed and joined in record time.
Units are very robust during installation and throughout their design life.
Efficient installation reduces project programme time.
High-quality materials provide unrivalled long-term performance with minimal maintenance.
Attenuation Tank Components |
|||
| Image | Description | Pipe Diameters | Sample Fabrication Drawings |
 | Single Side Manifold with Access Turret | 900 - 2250 mm |    |
 | Double Side Manifold with Access Turret | 900 - 2250 mm | |
 | Access Tee Pipe | 900 - 2250 mm | |
 | Access End Pipe | 900 - 2250 mm | |
 | Access End Pipe with Invert Level Outlet | 900 - 2250 mm | |
 | Access End Pipe with Sofit Level Inlet | 900 - 2250 mm | |
| Typical Construction Detail | |
||
The company’s greatest asset is not our state-of-the-art production facility or the engineered excellence of each product that it produces, but rather our people, who are individually committed to ensuring the highest standards of quality, service and support to our customers.
In a world that is increasingly concerned about its environment, it is reassuring to know that despite the enhanced performance of Aquaspira CSR large diameter pipes, on average they use 17% less material by weight than structured wall plastic pipes and only a fraction of that required to manufacture concrete or clay drainage products.
Spearheading the company is a highly experienced management team with over 100 years combined service acquired with market leading businesses in the drainage and pipe manufacturing sector, so you can rest assured, knowing you are in vastly experienced hands.
Always found it a pleasure to work with such a professional team that add value to our end product and understand onsite issues.
Simon Martel
Senior Engineer, Winvic
The 1800mm and 1200mm pipes were much easier to handle and install than similar size concrete pipes and together with the rapid, very simple fitting of the prefabricated access units, made a massive difference to the job.
Andy Paterson
Site Manager, GBSS Civils and Plant Hire Ltd
The Aquaspira solution has helped us to optimise the design, safety and installation efficiency of the development, as well as achieving minimal disruption for the local community. The installation ran smoothly and the environmental benefits offered by the products helped to ensure this was the perfect solution for the Barsham Vale development.
Dan West
Director, Ingent Consulting Engineers
Copyright © 2023 by (Paul O’Regan) Paul O’Regan Aquaspira Limited Nelson, Lancashire, UK | Nigel Cassidy University of Birmingham Birmingham, UK | Neil Wallace Aquaspira Limited Nelson, Lancashire, UK ABSTRACT…
Explore
This interview provides an inside look into the talented people who work with Aquaspira. For this interview we had the pleasure of sitting down with Nuha Alam, Engineering Placement Student...
Explore
